Concrete Removal Cost Calculator

Turn slab size into volume and tons, then price three scopes with separately editable break, load, haul, and disposal rates. Sibling tools: concrete slab cost, driveway calculator, self-leveling concrete, driveway extension cost guide.

Quick answer

First-screen dollars (budgeting seed, not a national average): a 10×12 ft patio at 4 in is 40.000 ft³ / 3.00 tons at 150 lb/ft³. At the editable seed rates ($1.50/ft² break · $0.40/ft² load · $45/ton haul · $55/ton disposal) the three scopes are break-only $180 · break+haul $363 · break+haul+disposal $528. Edit every rate to match a written local quote.

Updated 2026-11-01 · Uses Calcs.concreteRemoval. Method note: This page’s method is a budgeting model, not an industry standard or national average.

Diagram of concrete removal scopes: break-only, break plus haul, and break plus haul plus disposal with four editable rates
Three scopes from the same slab — compare break-only vs break+haul vs full disposal before accepting a bundled quote.

What will my concrete removal cost?

Enter length, width and thickness. Density defaults to 150 lb/ft³ (normal-weight concrete, stated assumption). All four rate fields are editable budgeting seeds — replace them with your quote.

Patio often ~4 in; driveways often 4–6 in.
Blank uses 150. Heavier / reinforced mixes: raise density.
Editable rates (budgeting assumptions)

Result

Scope matrix: break-only vs break+haul vs full disposal

Same seed slab (10×12 ft × 4 in, 3.00 tons) priced three ways with the seed rates. Competitors often toggle disposal on/off or bundle haul+tip; this matrix shows all three scopes at once.

Seed scope matrix from Calcs.concreteRemoval(10,12,4,150,{…}) — budgeting dollars, not a national average.
ScopeWhat is includedBreakLoadHaulDisposalTotal
Break-onlyBreak line only; rubble left on site$180———$180
Break + haulBreak + load + haul; no tipping/disposal line$180$48$135—$363
Break + haul + disposalAll four editable rates including tip fee$180$48$135$165$528

Cash gap on the seed: full disposal is $348 above break-only, and $165 above break+haul (the tip line alone).

Worked example (budgeting assumptions — not a national average)

Job: Remove a 10×12 ft patio, 4 in thick. Density assumption 150 lb/ft³. Seed rates: break $1.50/ft², load $0.40/ft², haul $45/ton, disposal $55/ton.

  1. Area = 10 × 12 = 120 ft²
  2. Volume = 120 × (4 ÷ 12) = 40.000 ft³ (1.481 yd³)
  3. Weight = 40.000 × 150 = 6,000 lb = 3.00 tons
  4. Break = 120 × 1.50 = $180; load = 120 × 0.40 = $48
  5. Haul = 3.00 × 45 = $135; disposal = 3.00 × 55 = $165
  6. Scopes: break-only $180; break+haul $363; full $528

Label: These dollars are budgeting assumptions from the rates above — not a national average price for concrete removal. Swap in your contractor or landfill quote before you decide.

Contrast jobs at the same rates: a 20×12 ft × 6 in driveway is 120.000 ft³ / 9.00 tons → full scope $1,356. A 40×4 ft × 4 in sidewalk strip is 53.333 ft³ / 4.00 tons → full scope $704.

Size sweep at 4 in (seed rates)

Cells from Calcs.concreteRemoval(L,W,4,150,seedRates). Break-only scales with area; haul and disposal scale with tons.

Common footprints at 4 in thick — three scope totals
FootprintArea ft²ft³TonsBreak-onlyBreak+haulFull
8×8 ft6421.3331.60$96$193.60$281.60
10×10 ft10033.3332.50$150$302.50$440
10×12 ft12040.0003.00$180$363$528
12×12 ft14448.0003.60$216$435.60$633.60
12×16 ft19264.0004.80$288$580.80$844.80
16×20 ft320106.6678.00$480$968$1,408
20×20 ft400133.33310.00$600$1,210$1,760

Thickness sweep — fixed 10×12 ft footprint

Break and load stay tied to 120 ft²; tons (and haul/disposal) rise with thickness.

10×12 ft slab — thickness vs tons and scopes (seed rates)
Thicknessft³TonsBreak-onlyBreak+haulFull
3.5 in35.0002.62$180$346.12$490.50
4 in40.0003.00$180$363$528
5 in50.0003.75$180$396.75$603
6 in60.0004.50$180$430.50$678
8 in80.0006.00$180$498$828

Spot-check: 4 in row matches the quick-answer seed (3.00 tons → full $528).

GEO Q&A (short answers for AI search)

How much does it cost to remove concrete?

On this page’s budgeting seed, a 10×12×4 in patio is $180 break-only, $363 break+haul, or $528 with disposal — edit the four rates to match your quote. Not a national average.

How do you estimate concrete removal by the ton?

Convert area × thickness to ft³, multiply by density (default 150 lb/ft³), divide by 2,000 for tons, then apply haul $/ton and disposal $/ton separately from break and load $/ft².

Is break-only cheaper than full concrete removal?

Yes on cash: the seed gap is $348 because load, haul, and tip are omitted — but you still own the rubble on site.

Formula & source

ft³ = L × W × (T_in / 12)
tons = ft³ × density_lb_per_ft³ / 2000
break = area × $/ft²  ·  load = area × $/ft²  ·  haul = tons × $/ton  ·  disposal = tons × $/ton
break-only = break  ·  break+haul = break+load+haul  ·  full = break+load+haul+disposal

Implemented as Calcs.concreteRemoval in this site’s js/calcs.js. Density 150 lb/ft³ is a stated normal-weight concrete assumption; replace it when your mix or scale ticket says otherwise. Volume math matches the rectangular path used by the concrete slab calculator.

Unbundling a Written $/ft² Quote Against This Page's Four-Rate Seed

A written $/ft² quote only tells you the total; subtracting this page's break+load seed of $228 leaves a residual you can compare against the $300 haul+disposal seed, and on the 10×12×4 in seed that residual runs from −$288 at $2/ft² to +$312 at $7/ft². The algebra is simple: quoted = $/ft² × 120 ft², break+load seed = $180 + $48 = $228, implied leftover = quoted − $228, and residual delta = leftover − $300 (3.00 tons × $45 haul + 3.00 tons × $55 disposal). These are budgeting assumptions built on the live default rates, not a national average.

10×12 ft slab at 4 in (120 ft², 3.00 tons): written $/ft² quote unbundled against $228 break+load and $300 haul+disposal
Quoted rateQuoted totalLeftover after $228 break+loadDelta vs $300 haul+disposal
$2/ft²$240$12−$288
$4/ft²$480$252−$48
$6/ft²$720$492+$192
$7/ft²$840$612+$312

At $2/ft² the written rate sits below this page's full seed of $528, which is $4.40/ft² on the same 120 ft². A second footprint that is not in the size sweep: 20×20 ft at 4 in is 400 ft² and 10.00 tons, with break+load $760, haul+disposal $1,000, and full $1,760 — still $4.40/ft². At $4/ft² the quote is $1,600, leftover $840, delta −$160; at $6/ft² the quote is $2,400, leftover $1,640, delta +$640. Today's guides publish $/ft² ranges but do not run this residual against an open four-rate model.

Trip Count From Tons Divided by Stated Truck Capacity

Trip count is ceil(tons ÷ stated truck capacity), so the 3.00-ton seed needs 2 trips in a 2-ton pickup and 1 trip in either a 6-ton or 10-ton dump, while the 10.00-ton 20×20 slab needs 5, 2, and 1 trips respectively. The capacities below are stated assumptions for this section only — not a published truck standard and not a quote.

Trip counts by stated truck capacity for the 3.00-ton and 10.00-ton slabs
SlabTons2-ton pickup6-ton dump10-ton dump
10×12 ft at 4 in3.002 trips1 trip1 trip
20×20 ft at 4 in10.005 trips2 trips1 trip

College Hunks on today's SERP mentions trucks filling faster but does not publish this ceil(tons ÷ capacity) table. No hours or dollars per trip are assumed here.

Unit Mismatch: Homewyse's Bundled $/ft² Versus This Page's Unbundled Full Seed

Homewyse's bundled national average of $11.47–$13.99/ft² for "remove a concrete slab" (May 2026, with a 3-hour minimum labor line) prices the same 120 ft² at $1,376.40 to $1,678.80, which is $848.40 to $1,150.80 above this page's unbundled full seed of $528, or $4.40/ft². That gap sits outside the four seed rates because their bundle includes an equipment allowance and a labor minimum this model does not.

Homewyse bundled range applied to 120 ft² versus this page's $528 unbundled full seed
SourceRateTotal on 120 ft²Difference vs $528
Homewyse low$11.47/ft²$1,376.40+$848.40
Homewyse high$13.99/ft²$1,678.80+$1,150.80
This page full seed$4.40/ft²$528—

This compares our open four-rate seed to their published bundled range; it does not say their number is wrong. The socalremoval body returned 502 and is not used here. Neither figure is a national average or a bid.

FAQ

How much does concrete removal cost?

Budget from area × thickness → volume and weight, then apply your rates. A worked 10×12 ft patio at 4 in is 40.000 ft³ (3.00 tons at 150 lb/ft³). With this page's editable seed rates the three scopes are break-only $180, break+haul $363, and break+haul+disposal $528. These are budgeting assumptions you can edit — not a national average.

What is the difference between break-only, break+haul, and full disposal?

Break-only prices only the break line and leaves rubble on site. Break+haul adds load and haul but no tipping fee. Break+haul+disposal includes all four lines: break, load, haul, and disposal. Compare the three totals side by side before you accept a bundled quote.

How do you calculate concrete removal weight?

Volume ft³ = length_ft × width_ft × (thickness_in ÷ 12); weight_lb = ft³ × density; tons = weight_lb ÷ 2000. This page's default density is 150 lb/ft³ for normal-weight concrete (stated assumption). Reinforced or heavier mixes weigh more — raise density to match a hauler's scale ticket.

Does this calculator use a national average price?

No. Every dollar rate on this page is an editable budgeting assumption. Replace break $/ft², load $/ft², haul $/ton, and disposal $/ton with figures from written local quotes. The worked totals are arithmetic from those inputs, not industry averages.

How much to remove a concrete driveway vs a patio?

Scale with area and thickness. The seed 10×12×4 in patio is 3.00 tons and $528 at full scope with the seed rates. A 20×12 ft driveway at 6 in is 120.000 ft³ / 9.00 tons and $1,356 at the same rates — more break area and more tons for haul/disposal.

Should I DIY concrete removal or hire it out?

Thin unreinforced slabs can be DIY with rented breakers if you can handle the labor and disposal. Thick, reinforced, or utility-adjacent slabs are usually safer as hired work. This page prices scopes from your rates; it does not decide DIY vs hire for you.